Services Markets Locations About How It Works Pricing FAQ Book Inspection
Tumwater · Thurston County · the Deschutes valley

Mold Inspection in Tumwater, WA.

Independent mold inspection in Tumwater and south Olympia, backed by an ISO/IEC 17025-accredited lab. Thermal imaging, plain-English reports, and zero remediation upsell — we don’t fix mold, we just tell you what’s there. Inspections start at $150.

ISO/IEC 17025 lab Thermal imaging included No remediation upsell
Pacific Northwest home, Tumwater, Thurston County
$150Mold inspections start at
100+Mold types tested
ISO 17025Accredited lab
2-3 dayLab turnaround
Certified inspectors
ISO/IEC 17025 lab
Fast turnaround
No upselling, ever

Why Tumwater Homes Are Prone to Mold

Tumwater is the oldest American settlement on Puget Sound, founded in 1845 at the falls of the Deschutes River. Housing runs from older homes near the historic district and the Deschutes valley to newer subdivisions toward Black Lake and the south end of town. Low ground along the Deschutes and around Black Lake holds moisture through the wet season, and homes of every age share the same long western Washington rainy season.

What’s Included in a Complete Mold Inspection

A thorough walkthrough, the right tools, lab-backed sampling on request, and a written report you can hand to insurance, your buyer, or your remediation contractor. No corners cut, no padding the bill.

Visual & moisture walkthrough

Every accessible area inspected — living spaces, bathrooms, kitchens, basements, crawlspaces, attics, utility rooms. We document moisture readings, humidity levels, and any visible signs of growth or water intrusion.

Thermal & infrared imaging

Thermal imaging reveals temperature anomalies behind walls and ceilings — the cold spots that indicate hidden moisture from leaks, condensation, or vapor intrusion. Included on every Complete Mold Inspection at no extra charge.

Optional air sampling

Air samples capture mold spores from the indoor environment and ship to the lab for species identification and concentration measurement. Most useful when there are health symptoms but no visible growth, or for real estate documentation.

Optional surface sampling

Tape-lift or swab samples from suspected growth, sent to the lab for confirmation and species ID. Especially useful when you can see something but don’t know if it’s mold — or which kind.

Written photo-documented report

A PDF report with every area inspected documented, photo evidence, moisture readings, lab results (when sampled), and clear plain-English recommendations. Formatted to share with insurance, realtors, or remediation contractors.

Honest pre-call

If your situation doesn’t actually need an inspection, we’ll tell you on the phone before booking. We make zero money turning away non-jobs — we just don’t want to charge you $150 for a problem that didn’t exist.

Don’t get spored into spending $2,500 on a mold inspector.

Full mold inspections in Tumwater start at just $150 — the most affordable, certified, quality-driven option in Washington State. Thermal scan included; the base covers up to 1,500 sqft (+$50 per additional 500 sqft). Optional add-ons: air samples $250 for the first (with an outdoor control sample) then $100 each, surface samples $100 each.

Use the calculator to estimate your total before you book.

How a Mold Inspection Works

Four steps from first call to a written, lab-backed report you can hand to insurance, your buyer, or your remediation contractor.

1

Book online or call

Same-day reply. We confirm the scope, the address, and your timeline before locking the slot. No surprise fees.

2

On-site inspection

1.5 to 2 hours for a typical home. Visual walkthrough, moisture readings, thermal imaging, and any optional sampling you opted in to.

3

Lab analysis

Samples ship to our ISO/IEC 17025-accredited lab. Results come back in 2 to 3 days — full species identification and concentration data.

4

Written report delivered

Photo-supported PDF with findings, lab results, and recommendations. Ready to share with insurance, realtors, or remediation contractors.

Mold Inspection FAQ — Tumwater, WA

The questions we get most often when homeowners in Tumwater are deciding whether to book.

A complete mold inspection in Tumwater starts at $150 — the most affordable, certified, quality-driven option in Washington State. The base covers up to 1,500 sqft (+$50 per additional 500 sqft) with thermal imaging included. Optional lab samples: an air sample is $250 for the first (it includes an outdoor control sample) then $100 each additional, and surface samples are $100 each — you only pay for what you need. Most local competitors charge $1,500–$2,500 for the same scope.

A non-invasive walkthrough of every accessible area, thermal imaging to find hidden moisture, humidity and moisture readings, and a written photo-documented report with sampling recommendations. If you opt in to lab samples, the lab tests for 100+ mold species and other particles.

Common signs: persistent musty smell, visible discoloration, peeling paint, warped baseboards, ongoing respiratory symptoms after moving in, recent water damage. In Thurston County, the long wet season, older homes, and crawlspaces all raise the baseline risk.

Yes. If a remediation contractor has already done the work, air and surface sampling can verify the space is clear before you close up walls, move back in, or list the home. Because we never perform remediation ourselves, the clearance result is independent.

Yes. Reports are formatted for buyer/seller use and routinely shared with realtors, escrow officers, and insurance adjusters. We’re independent — we don’t perform remediation — so the report is unbiased. We work around tight closing timelines.

Yes. Tumwater and the surrounding Thurston County communities are part of our regular service area, dispatched from our office in Toledo, WA. Very rural properties may include a small travel fee, always quoted in writing before booking.

Only if the data says so. We don’t perform remediation — that’s a deliberate separation. Many of our reports conclude no remediation is needed, which is the answer customers most often want and rarely get from inspectors who also sell the cleanup.

Serving Tumwater & Nearby Communities

Dispatched from our Toledo office, we serve Tumwater and the surrounding Thurston County communities, including Olympia, Lacey, Tenino, and Rainier. Very rural or remote properties may include a small travel fee, always quoted in writing before we book. See all of Thurston County →

Book a Mold Inspection in Tumwater.

Same-day reply. Written quote before we book. ISO 17025 lab. Inspections from $150.